Top 3 Pool handrail
FibroPool Swimming Pool Hand Rail with Quick Mount Base
This all-stainless-steel handrail is perfect for any size pool. Featuring a small footprint, this rail is designed to take up minimal desk space while ensuring a safe, sturdy support for entering and exiting the water. And the stainless steel design ensures that your handrail will remain free of rust and stains for years to come. Included in the package are four (4) 2 1/4" screws, four (4) lead anchors, and one 1/2" masonry drill bit, so you spend less time and money on hardware. Installation is easy, requiring only a hammer drill, wrench, and measuring tape. Product measures approximately 36" tall, 48" long, and tube has a diameter of 1.67" Baseplate measures 9 3/4" x 3 7/8" Measure 10 inches from the tile on the inside of pool Mark and drill 4 holes for baseplate (1/2" drill bit for anchors in concrete installation, 1/4" bit for only screws in wood installation) If installing in concrete, insert anchors first. Then place handrail, and tighten all four screws
Feature:
- Quickly mounts to deck with 4 easy bolts
- Sturdy stainless steel construction
- 48" long, 36" tall, Built in BASE PLATE
- Mounts into concrete with a 1/2" hammer drill bit or into wood with a 1/4" bit
Inter-Fab D4BD049 Deck to Deck Mounted 4 bend St in ground pool step handrail sainless Steel 304 Stair Rail with Brace
Inter-Fab's residential handrail is perfect for pool entry areas. Sturdy durable with a bright gleaming finish, the welded cross brace makes this is our strongest handrail, unbeatable strength and stability that will give you years of trouble-free enjoyment. Manufactured from high-quality 304 stainless steel,1.90 diameter 0.049 wall thickness. You must purchase the anchors and escutcheons separately. Made in the United States and has a three-year warranty. Easy to install, comes with full instructions or just go to inter-fab.com and view a complete assembly and installation video It also comes with a 3-year warranty.
Feature:
- Stainless steel 304 deck to Deck four bend braced sloped pool rail with 49" Span
- Perfect for pools with Steps
- 1. 90-Inch outer diameter tubing with. 049-inch wall thickness
- Does not include deck anchors or escutcheons
Inter-Fab DR-G3DE065-SINGLE Economy Stainless Steel Pool Grab Rail Ladder (Single) Designer handrail
A modern and attractive alternative to a traditional grab rail but with a contemporary style. This single Designer Economy Inter-Fab Grab Rail is made out of stainless steel 304 alloy (1.90" outer diameter tubing and .065" wall thickness) and follows closely the profile of the proven traditional economy Figure Four grab rail. No additional deck is required as the designer rail starts and ends at the same point of the traditional grab rail. This 24" tall rail can replace the economy Figure Four grab rail. Please note that this is 6" shorter than the DR-G3D065 rail. It is perfect for in-ground spas, pool entry areas, swim-outs or use two for pools with in-wall ladder treads. Sturdy and durable with a bright gleaming finish, unbeatable strength and stability that will give you years of trouble-free enjoyment. The rail spans 29". Typical setback is 18" from the pool wall. Please note that two 4" anchors or two escutcheons do not come with the rails - they will need to be purchased separately. Check your local electrical code to determine bonding requirements. Bond rail in accordance with code. Residential or commercial use. Single rail only. Go to inter-fab . com for complete assembly and installation video. Made in the United States and has a three-year warranty.
Feature:
- Designer Economy Grab rail - Single (1.90" OD x .065" wall thickness)
- A modern and attractive single 24" tall designer rail that easily replaces Figure 4 traditional pool rail
- For commercial or residential pools with in-ground spas, pool entry areas, swim-outs or in-wall ladder treads
- 3-year warranty that includes rust, made in the USA
- Does not include anchors or escutcheons - must purchase separately
